Entry and exit time can be adjusted and set between 10 and 60 seconds. Entry and exit delay is fixed for all zones and can not be set differently to the zones. Entry set to min. 10 seconds and can not be removed completely. Settings are made as follows:
Entry:
- Enter the current pin code followed by the ENTER (default PIN is 1-2-3-4)
- Press Wrench (tool symbol on the keypad)
- Press the 7 number
- Then press the 7 number again, at each press changes the time by 10 seconds. Press until the desired entry time is displayed
- Press ENTER
Exit:
- Enter the current pin code followed by the ENTER (default PIN is 1-2-3-4)
- Press Wrench (tool symbol on the keypad)
- Press the 4 number
- Then press the 4 number again, at each press changes the time by 10 seconds. Press until the desired exit time is displayed
- Press ENTER