Support
If you call for support, please have the following ready:
Product:
Alarm Starter Kit 01 with Kamera- WiFi
Item no.: 278021
You can also send an email to support with your question
(info@safehome.dk)
SEND EMAIL TO SUPPORT
Send me an email with the answer:
Manuals
Download ManualThere is no Quick Guide at this product
Technical Specifications
Alarm Starter Kit 01 with Kamera- WiFi
Connecting sensors and contacts for Smart Panel
Room sensor and door/window contact is factory set to operate with the panel, and no changes should therefore be made to get these works.
If you find that a room sensor or door/window contact is not communicating with the panel, we recommend you check the device indicated zone is active on the panel, and that the house code is set corresponding panel house code. If you have not changed the house code on the system, we recommend that you change this.
Zone settings:
The room sensor is factory set to zone 8.
Door / window switch is set to Zone 1.
Did you change or want to change the zone settings, you can read in the manual how to do those changes.
House Code settings:
All units is set to the same factory settings. In all sensors, panels, sirens and remotes are four "jumpers" or contacts. These can be made in either position "on" or "off".
You can then change its "house code" on all devices.
Only devices with the same "house code" can communicate. Did you change or want to change the house code in your system, you can read in the manual how to do those changes.
If you find that a room sensor or door/window contact is not communicating with the panel, we recommend you check the device indicated zone is active on the panel, and that the house code is set corresponding panel house code. If you have not changed the house code on the system, we recommend that you change this.
Zone settings:
The room sensor is factory set to zone 8.
Door / window switch is set to Zone 1.
Did you change or want to change the zone settings, you can read in the manual how to do those changes.
House Code settings:
All units is set to the same factory settings. In all sensors, panels, sirens and remotes are four "jumpers" or contacts. These can be made in either position "on" or "off".
You can then change its "house code" on all devices.
Only devices with the same "house code" can communicate. Did you change or want to change the house code in your system, you can read in the manual how to do those changes.
FAQ
OPEN We are two neighbors who want to install SafeHome Wireless Alarm System, but how do we avoid disconnection / and engage each other's alarms with the same remote controls?OPEN Can I buy additional alarm signs or signs in acrylic for mounting outdoors?
OPEN Can I purchase additional devices for connecting to the wireless alarm system?
OPEN How long will the batteries last?
OPEN Can SafeHome give me a discount on my home insurance?
OPEN Can the wireless alarm system be accessed from a computer?
OPEN My alarm goes off, although there is nothing which has enabled it
OPEN Can a sensor / sensor activate the alarm if it is running out of battery?
OPEN Remember my alar system settings after power outage?
OPEN After the power failure, I can not lock my system up with PIN?
OPEN How long can the panel run on backup battery?
OPEN Is PIN and house code the same?
OPEN Connecting sensors and contacts for Smart Panel
OPEN How many devices can be connected to the system?
OPEN How to reset Smart panel?
OPEN How triggered panic function/immediate activation
OPEN What is the difference between ARM, HOME and ALERT?
OPEN Can sound levels for countdown or operation be changed or be removed
OPEN I cannot enroll the remote control to the alarm panel.
OPEN The app cannot connect the camera to WiFi - the camera keeps flashing and does not change to constant blue light indicating connection.