Support
If you call for support, please have the following ready:
Product:
Wireless GSM Autodialer/Controller
Item no.: 278033
You can also send an email to support with your question
(info@safehome.dk)
SEND EMAIL TO SUPPORT
Send me an email with the answer:
Manuals
Download Manual
Technical Specifications
| Package Dimensions (cm) : | 28 x 16.4 x 6 |
| Package weight (gram) : | 395 |
| Netværk: | GSM 850/90/1800/1900 MHz |
| Power in: | 230-240V (50Hz) |
| Power out: | 9 V, 0,3A |
| Backupbatteries: | 4 x 1,5 V AA Alkaline |
| Frequency: | 868 MHz |
- Low battery indicator
- With screws, plugs, adhesive tape
Wireless GSM Autodialer/Controller
To set the house code
Make sure the house code is set to the same in all sensors and Smart Panel.
In all sensors, panels, sirens and remotes are four "jumpers" or contacts. These can be made in either position "on" or "off" - or the little jumper can be removed ("off") or put on ("on").
One can therefore change its "house code" on all devices. Only devices with the same "house code" can communicate. All units and construction is set to the same from factory, but in the manual, it is described how it changed.
In all sensors, panels, sirens and remotes are four "jumpers" or contacts. These can be made in either position "on" or "off" - or the little jumper can be removed ("off") or put on ("on").
One can therefore change its "house code" on all devices. Only devices with the same "house code" can communicate. All units and construction is set to the same from factory, but in the manual, it is described how it changed.
FAQ
OPEN Can SafeHome Dialers call mobile phones?OPEN Are all the devices on battery?
OPEN Setting up the APP - iPhone or Android
OPEN GSM Auto Dialer does not respond to the text messages I send
OPEN My alarm goes HOME mode after INQUIRY-SMS?
OPEN How to quick set the GSM Auto dialer from a Windows Phone
OPEN When the alarm goes !!
OPEN To set the house code
OPEN My alarm goes off, although there is nothing which has enabled it