How to quick set the GSM Auto dialer from a Windows Phone

There are no APP for Windows Phone, so commands should be sent as plain text messages. You can see the list in the manual.
All SMS messages should start by 1234 and then command - without gaps - eg. 1234ARM - command must stand med capital letters.
There can only be given commands from the phone that is selected as the first phone in the system.
When you need to use GSM auto dial for the first time, it is necessary to send an SMS to GSM auto dialer, who stes this number.
Message must be sent from the phone to stand on the first place - has auto dialer earlier been set up by another phone, it must be reset to factory settings.
This is done by holding the reset button under the battery cover down in at least 10 seconds while the GSM auto dialer is on.
The SMS sending to GSM auto dialer should look like this:
1234SETTEL (space) 1 (space) (phone number)
You can similarly add the phone number 2, to be called by alarm:
1234SETTEL (space) 2 (space) (phone number)
SETTING UP MORE NUMBERS AT ONCE
You can put up to all eight group numbers up at once by the face end command.
There should be no spaces in the SMS and PrimaryPremisses, should be big / small letters as indicated. In the example below, the main phone (No. 1) phone number 22334455, phone 2 has the number 11223355 and telephone 3 has the number 44,556,677th must be called three times if the phone is not made before.
Here the following SMS to auto dial transferee:
PZZS(kode)SETTEL(telefon1)-(telefon2)-(telefon3)-(telefon4)-(telefon5)-(telefon6)-(telefon7)-(telefon8)-PrimaryPremises-3-PZZE

It appears that this SMS from:
PZZS1234SETTEL22334455-11223355-44556677 ------ PrimaryPremises-3-PZZE

                                                                                                                                                                                                     

---

We try to constantly improve the support page, and would therefore appreciate your response.
Have ideas for the support page, you are welcome to send an email to info@safehome.dk:

Did you get answers to your questions?

Yes absolutely	Yes partially	Not quite	Absolutely NO