Home Find Your Camera Videos at Youtube Updates/firmware Dansk  Engelsk 
Support
If you call for support, please have the following ready:

Product:
Wireless Motion Detector/PIR
Item no.: 278003


You can also send an email to support with your question
(info@safehome.dk)
SEND EMAIL TO SUPPORT


Send me an email with the answer:


Attach the manual


Manuals

Download Manual

There is no Quick Guide at this product

Technical Specifications

Package Dimensions (cm) :22.5 x 15.3 x 7
Package weight (gram) :151
Vinkel, afstand:120°, 6 m
Dimension, mm:123 x 67 x 38
Vægt, g:77
Batterier:9 V Alkaline
Frekvens:868 MHz

Wireless Motion Detector/PIR

I try to test my room sensor, but there is a very long time since I activate the alarm to the room sensor detects that I go around the room?

The room sensor is designed with a power saving program. The room sensor will remain inactive for 3 minutes after each detected movement. Therefore, you should be aware of this during the installation and testing of the system. That means that if you try to trigger the alarm before this time has elapsed, the sensor will not respond to movements. The test is performed by activating the alarm, and then go in front of the sensor 3 minutes after the last detected movement. Then the sensor will send signal to the panel, which begins its countdown before the siren is triggered.
                                                                                                                                                                                                     

We try to constantly improve the support page, and would therefore appreciate your response.
Have ideas for the support page, you are welcome to send an email to info@safehome.dk:

Did you get answers to your questions?

Yes absolutely Yes partiallyNot quiteAbsolutely NO

FAQ
OPEN  Should the wireless sensor also flash red when you walk past, when the system is switched off?


OPEN  I installed new sensors, but it seems like they will not communicate with the control panel?


OPEN  I try to test my room sensor, but there is a very long time since I activate the alarm to the room sensor detects that I go around the room?


OPEN  What responds the wireless room sensors on?


OPEN  Are all the devices on battery?


OPEN  How long will the batteries last?


OPEN  To set the house code


OPEN  My alarm goes off, although there is nothing which has enabled it


OPEN  Can a sensor / sensor activate the alarm if it is running out of battery?


OPEN  Is there an installation video?


OPEN  Connecting sensors and contacts for Smart Panel


OPEN  How can I see that there is a low battery?