Support
If you call for support, please have the following ready:
Product:
Wireless Motion Detector/PIR
Item no.: 278003
You can also send an email to support with your question
(info@safehome.dk)
SEND EMAIL TO SUPPORT
Send me an email with the answer:
Manuals
Download ManualThere is no Quick Guide at this product
Technical Specifications
| Package Dimensions (cm) : | 22.5 x 15.3 x 7 |
| Package weight (gram) : | 151 |
| Vinkel, afstand: | 120°, 6 m |
| Dimension, mm: | 123 x 67 x 38 |
| Vægt, g: | 77 |
| Batterier: | 9 V Alkaline |
| Frekvens: | 868 MHz |
- Lavt batteriforbrug
- Indikator for lavt batteriniveau
- Op til 100 m rækkevidde
- Let installering
Wireless Motion Detector/PIR
My alarm goes off, although there is nothing which has enabled it
The alarm is only switched off when you press the white unlocked padlock on the remote control.
Stands alarm in "HOME" mode, it will be activated if one of the sensors associated with HOME mode is activated.
False alarms and disturbances in the alarm system may occur if there are other SafeHome facilities nearby, or other wireless devices can cause interference on frequency. If you have not changed "house code", we recommend that you change this.
In all sensors, panels, sirens and remotes are four "jumpers" or contacts. These can be made in either position "on" or "off". One can therefore change its "house code" on all devices. Only devices with the same "house code" can communicate. All units and construction is set to the same from factory, but in this manual it is described how it changed. If this does not clear, interference may come from other wireless devices such as remote heating system, wireless bells or things like that. If you have these, you can try to change the frequency of these.
Stands alarm in "HOME" mode, it will be activated if one of the sensors associated with HOME mode is activated.
False alarms and disturbances in the alarm system may occur if there are other SafeHome facilities nearby, or other wireless devices can cause interference on frequency. If you have not changed "house code", we recommend that you change this.
In all sensors, panels, sirens and remotes are four "jumpers" or contacts. These can be made in either position "on" or "off". One can therefore change its "house code" on all devices. Only devices with the same "house code" can communicate. All units and construction is set to the same from factory, but in this manual it is described how it changed. If this does not clear, interference may come from other wireless devices such as remote heating system, wireless bells or things like that. If you have these, you can try to change the frequency of these.
FAQ
OPEN Should the wireless sensor also flash red when you walk past, when the system is switched off?OPEN I installed new sensors, but it seems like they will not communicate with the control panel?
OPEN I try to test my room sensor, but there is a very long time since I activate the alarm to the room sensor detects that I go around the room?
OPEN What responds the wireless room sensors on?
OPEN Are all the devices on battery?
OPEN How long will the batteries last?
OPEN To set the house code
OPEN My alarm goes off, although there is nothing which has enabled it
OPEN Can a sensor / sensor activate the alarm if it is running out of battery?
OPEN Is there an installation video?
OPEN Connecting sensors and contacts for Smart Panel
OPEN How can I see that there is a low battery?