Support
If you call for support, please have the following ready:
Product:
Wireless Autodialer (PSTN Fastnet)
Item no.: 278016
You can also send an email to support with your question
(info@safehome.dk)
SEND EMAIL TO SUPPORT
Send me an email with the answer:
Manuals
Download ManualThere is no Quick Guide at this product
Technical Specifications
| Package Dimensions (cm) : | 22.5 x 15.3 x 10 |
| Package weight (gram) : | 417 |
| Forbindelse: | Kablet til PSTN stik (fastnet) |
| Dimensioner, mm: | 155 x 65 x 35 |
| Vægt, g: | 170 |
| Backup batteri: | 4 x 1,5 V AA Alkaline |
| Strømforsyning, ind: | 100-240 V (50/60 hz) |
| Strømforsyning, ud: | 9,5 V, 0,5 A |
| Strømforbrug: | 4,75 W |
| Frekvens: | 868 MHz |
- Autoopkald til op til 8 numre
- Op til 100 m trådløs rækkevidde
- Let installering
Wireless Autodialer (PSTN Fastnet)
My alarm goes off, although there is nothing which has enabled it
The alarm is only switched off when you press the white unlocked padlock on the remote control.
Stands alarm in "HOME" mode, it will be activated if one of the sensors associated with HOME mode is activated.
False alarms and disturbances in the alarm system may occur if there are other SafeHome facilities nearby, or other wireless devices can cause interference on frequency. If you have not changed "house code", we recommend that you change this.
In all sensors, panels, sirens and remotes are four "jumpers" or contacts. These can be made in either position "on" or "off". One can therefore change its "house code" on all devices. Only devices with the same "house code" can communicate. All units and construction is set to the same from factory, but in this manual it is described how it changed. If this does not clear, interference may come from other wireless devices such as remote heating system, wireless bells or things like that. If you have these, you can try to change the frequency of these.
Stands alarm in "HOME" mode, it will be activated if one of the sensors associated with HOME mode is activated.
False alarms and disturbances in the alarm system may occur if there are other SafeHome facilities nearby, or other wireless devices can cause interference on frequency. If you have not changed "house code", we recommend that you change this.
In all sensors, panels, sirens and remotes are four "jumpers" or contacts. These can be made in either position "on" or "off". One can therefore change its "house code" on all devices. Only devices with the same "house code" can communicate. All units and construction is set to the same from factory, but in this manual it is described how it changed. If this does not clear, interference may come from other wireless devices such as remote heating system, wireless bells or things like that. If you have these, you can try to change the frequency of these.
FAQ
OPEN Can SafeHome Dialers call mobile phones?OPEN What kind of telephone can be used for the wireless call device?
OPEN Is the wireless call device sending text-messages during break?
OPEN Are all the devices on battery?
OPEN To set the house code
OPEN My alarm goes off, although there is nothing which has enabled it